Electric-Pump

Electric Pump (E80 – E120)

Diesel transfer electric pump. Displacement, self-priming rotary electric vane pumps. Fitted with by-pass valve and elevated reliability seal even at low working temperatures. Compact and easy to install they are ideal for dispensers, fixed fuel transferring systems and other industrial applications. Sturdy cast iron structure, vane pump with sintered steel rotor and acetal resin vanes, induction motor with aluminium casing. Suitable for continuous use with thermal motor overload protection.

Flow rate: up to 100 lpm

 Dry-Brake-coupling

Dry Brake Coupling

Break-away-coupling-OPW

Break Away Coupling OPW

 Vent-Pressure-vacuum

Vent – Pressure Vacuum

 Vent-down-vent

Vent – Down Vent

 Vent-Brass-mushroom

Vent – Brass Mushroom

 Piusi-Nozzle

Farm Nozzle

 Piusi-Nozzle-2

Automatic Nozzles

These nozzles are fitted with a device that automatically shuts off flow when the tank is full. Complete with swivel connector they conform to the strictest safety requirements and bear all necessary certifications.

A60: 60 lpm, 1” BSP female inlet, Swivel on inlet
A120: 120 lpm, 1” BSP female inlet, Swivel on inlet

 Meter-K44

Meter K44

K33 and K44 Mechanical meters. Designed to measure the exact quantity of dispensed liquid (fuel or lubricant) for non re-sale use. Reliable, economical and easy to install and calibrate on site. Up to 120lpm with +/– 1% accuracy

 honda-wx15

Honda WX15

 Fuel-Hose-swaged-end

Fuel Hose – Swaged End

25mm swaged end fuel and oil hose 3m, 4m and 7m lengths. Custom lengths and sizes can be ordered

 Filter-Zeeline

Filter – Zeeline

 Filter-Water-captor

Water Captor

Cartridge filters and water absorbing filters. Water separating filter. The delivery filter is a water absorbing cartridge. These filters guarantee the fundamental protection of motors using station dispensed diesel. This type of filter characteristically separates and absorbs any water present in the pumped diesel. The absorption of water however gradually causes a reduction in filtering capacity and consequently increases head loss caused by the filter. All waterlogged filters should be replaced.

Performance:
Filtering capacity: 30 µm
Flow rate: 70 – 150 l/min
Beta Rating: 200
Operating pressure: 3.5 bar
Bursting pressure: 10 bar

Clear Captor

Cartridge filter with transparent container and removable inner cartridge can be applied on both suction and delivery. They are available with water absorbing cartridge. The amount of impurities or water present are immediately visible in the transparent container. Any water or impurities are cleaned out by a valve set in the bottom of the container.

Filter-Basic

Filter – Basic

Applications
Designed for fuel dispensers & commercial fuel pumps. Cellulose and Hydrosorb filters are for the use with gasoline, diesel, biodiesel or ultra-low sulphur diesel

Performance:
Filtering capacity: 10 µm
Flow rate: 95 l/min
Beta Rating: 200
Operating pressure: 3.4 bar
Bursting pressure: 9 bar